产品中心
联系我们
传真: +86-755 3396 7196
邮箱: [email protected]
总部地址：深圳市龙岗区龙城街道回龙埔社区恒明湾创汇中心1栋AB座1803C
10G Dual SFP+
SPP-8592-SRx
10GBASE-SR SFP+ 850nm MMF 300m
Sky Optics‘ SPP-8592-SRx (850 nm VCSEL 10Gigabit SFP+ transceiver) is designed to transmit and receive optical data over 50/125 μm or 62.5/125 μm multimode optical fiber. Its electrical interface is compliant to SFI electrical specifications.The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.
The transmitter converts 10Gbit/s serial PECL or CML electrical data into serial optical data compliant with the 10GBASE-SR standard. An open collector compatible Transmit Disable (Tx_Dis) is provided. The receiver converts 10Gbit/s serial optical data into serial PECL/CML electrical data. An open collector compatible Loss of Signal is provided. Rx LOS when high indicates an optical signal level below that specified in the relevant standard.
-
l Hot pluggable SFP+ footprint
l
l Supports multirate from 2G fiber channel to 10G Ethernet
l 850 VCSEL transmitter, PIN photo-detector
l Applicable for 300m MMF connection
l Built-in digital diagnostic functions
l Operating case temperature:
Comercial: 0 to +70°C
Extended: -20 to +80°C
Industrial: -40 to +85°Cl Low power consumption
l Single 3.3V power supply
l RoHS-6 compliant (lead-free)
-
Package (Form Factor)
SFP+
Data Rate
10.3 Gb/s
Transmitter
DFB Laser
Receiver
PIN photo detector
Distance
300m
Centre Wavelength
850nm
Diagnostics
Digital Monitor
Operating Case Temperature
0°C ~ 70°C (commercial)
-20°C ~80°C
-40°C ~ 85°C
Voltage Supply (typical)
3.3v
Connector
Duplex LC/UPC
TX Output Power
-6.5 ~ -1dBm
RX Sensitivity
-11dBm
-
l 10GBASE-SR at 10.3125Gbps
l 10GBASE-SW at 9.953Gbps
l Other optical links
发邮箱
在线客服
在线客服